Parts For Proprocessor Manual Sausage Stuffers
Manual Stuffing Tube Set for Pro Processor Sausage Stuffer
(Item #698-128)
Stainless Steel Stuffing Tube Set comes with four sizes 1 5/8", 1 1/2", 7/8" 5/8". These tubes are made to fit the Pro Processor Electric Sausage Stuffer.
Manual Stuffing Tube Set for Pro Processor Sausage Stuffer
(Item #700-259)
Stainless Steel Stuffing Tube Set comes with four sizes 1 1/2", 1 1/4", 3/4" 1/2". These tubes are made to fit the Pro Processor Manual Sausage Stuffer.
Manual Stuffing Tube for Pro Processor Sausage Stuffer
(Item #700-265)Stainless Steel Stuffing Tube measures 1/2" in diameter.
Manual Stuffing Tube for Pro Processor Sausage Stuffer
(Item #700-266)Stainless Steel Stuffing Tube measures 3/4" in diameter.
Manual Stuffing Tube for Pro Processor Sausage Stuffer
(Item #700-267)Stainless Steel Stuffing Tube measures 1 1/4" in diameter.
Manual Stuffing Tube for Pro Processor Sausage Stuffer
(Item #700-268)Stainless Steel Stuffing Tube measures 1 1/2" in diameter.
Cannister clips for ProProcessor Sausage Stuffers
(Item #660-150)
O Ring for 15 Lb stuffer from ProProcessor
(Item #700-253)
Will not fit Cabela's Stuffer
O Ring for 20-40 Lb sausage stuffer from ProProcessor
(Item #700-254)Also fits 30 lb. electric sausage stuffer
Canister by ProProcessor 15 Lb.
(Item #700-255)
Have an extra canister on hand to
speed up stuffing time. Handy when a full canister can be replaced with an empty one. This canister fits the ProProcessor 15 lb stuffer.
6.625" diameter
Canister by ProProcessor 20 Lb.
(Item #700-256)
Have an extra canister on hand to
speed up stuffing time. Handy when a full canister can be replaced with an empty one. This canister fits the ProProcessor 20 lb stuffer.
8.5" diameter
Threaded Gear Shaft
(Item #637019)Gear shaft for 20 Lb. Manual Proprocessor Stuffer.
Measures: 22.75" long.
Will not work with Weston or Cabelas products
Canister by ProProcessor 30 Lb.
(Item #700-257)
Have an extra canister on hand to
speed up stuffing time. Handy when a full canister can be replaced with an empty one. This canister fits the ProProcessor 30 lb stuffer.
8.5" diameter
Piston for a 20, 30 and 40 Lb. Proprocessor Stuffer
(Item #637-015)Piston includes air lock. Fits 20, 30, or 40 Lb. Proprocessor Stuffer.
This does not fit
Cabella's or Weston
Threaded Gear Shaft
(Item #637-018)Gear shaft for 30 Lb. Proprocessor Stuffer.
Measures: 22.75" long.
Canister by ProProcessor 40 Lb.
(Item #700-258)Have an extra canister on hand to
speed up stuffing time. Handy when a full canister can be replaced with an empty one. This canister fits the ProProcessor 40 lb stuffer.
8.5" diameter
Gearbox ProProcessor
(Item #637-006)This Pro Processor Gearbox will fit the 15 lb ProProcessor sausage stuffer.
Gearbox by Pro Processor
(Item #637-005)
This Pro Processor Gearbox will fit the 20 lb, 30 lb and 40 lb Pro Processor sausage stuffer.
Gearshaft by Pro Processor
(Item #636-990)
This Pro Processor Gearshaft will fit the 20 lb, 30 lb and 40 lb Pro Processor sausage stuffer.
Gearshaft & gear by Pro Processor
(Item #636-991)
This Pro Processor Gearshaft & gear will fit the 20 lb, 30 lb and 40 lb Pro Processor sausage stuffer.
Handle for Pro Processor Manual Sausage Stuffer
(Item #699-649)
Rubber Feet for Manual Pro Processor Sausage Stuffer
(Item #699-327)
Ring for Manual Pro Processor Sausage Stuffer Tube
(Item #699-507)
Parts For Weston & Cabelas Manual & Electric Sausage Stuffers
If you need parts for the electric motor that Weston & Cabela's used on their stuffers about 2010 click here:
Fast gear - top drive for 20-30 lb. stuffers
(Item #660-071)
square drive shaft for fast speed drive for raising piston. Replacement for older Cabela's square drive stuffers.
May also be used to convert old Weston splined drive and make them work again!
HAS NO KEYWAY
Extra 11 lb. canister for 11 lb. stuffer
(Item #660-118)
Speeds stuffing time when a full canister can replace the empty one.
5.5" diameter
Stuffer O-ring For Weston
(Item #699-787)
This is a stuffer O-ring for an 11 lb Weston Sausage Stuffer.
Measures 5" in diameter
Extra 20 lb. canister for 20 lb. stuffer
(Item #660-117)
Speeds stuffing time when a full canister can replace the empty one.
15" long
7.5" diameter
Piston Ring
(Item #660-115) Fits 20-30 lb stuffers model number 07-3462-N
Measures 7 1/8" in diameter
No longer available - Choose 660-152 below
O Ring
(Item #660-152)
We purchased these to be a replacement for the 660115 o-ring above since Cabelas & Weston no longer sell them. There are many of the 20-30 lb stuffers that need the 660-115 o-ring so we found replacements for it. They are pretty tight so we recommend using Food Grade Silicon Spray to make them easier to push. The number is 699570. Guaranteed replacement or credit.
Air Lock
(Item #660-112) Fits 20-30 lb stuffers
Air Lock Spring
(Item #660-114)Fits 20-30 lb.
Weston
Sausage Stuffers
Lubri-Film Plus(Item #700-150)Use this where any food handling equipment needs to be lubricated.
Food Grade Lubricating Grease
(Item #699-918) Prevents wear and corrosion. Longer lasting film allows less lubricant usage and extended re-greasing intervals. Made in the U.S.A. 14 ounces.
Weston Brand Silicone Spray(Item #699-570)Heat-Stable Silicone Release Agent for food packaging and processing equipment
Cast Iron Stuffer Parts. Choprite Stuffer Parts
<
Large Stuffing Plate for #35 Sausage Stuffer.
8 quart. 8 1/8 in. In diameter(Item # 699-751)
As shown on right above
Chop-Rite or Enterprise Sausage Stuffer Nut(Item #699-919)
Fits Both #35 Eight Quart Stuffer & #25 Four Quart Stuffer.Fits most cast iron stuffers that
Use 2 lugs to lock on.
(Also shown in picture above.)
Large Plunger Plate for #25(4qt)
Stuffer. (Item # 699-750)
6 1/2 in. In Diameter
(to the left in picture above)
Stainless Steel Strainer Basket for #31 stuffer
(Item #699-647)Great for pressing lard or fruit.
Measures: 8"D x 7"T
Stainless Steel Strainer Basket for #35(8qt.) Stuffer (Item # 699-761)
Great for pressing lard or fruit.
Perforated Strainer Base for #35 (8qt.) Stuffer(Item # 699-763)
Needed with Screen From Above.
Small Plunger Plate for #35
(Item # 699-757)
Great for pressing lard or fruit
Stainless Steel Strainer Basket for #25 (4qt) Sausage Stuffer(Item # 699-762)
Great for pressing lard or fruit
Perforated Strainer Base for #25 (4qt) Sausage Stuffer(Item # 699-764)
Needed with Screen From Above
Small Stuffing Plate for #25 (4qt) Sausage Stuffer(Item # 699-756)
Needed to Fit Strainer Screen From Above
Crank for Stuffers. Has square 1/2" hole.(Item # 700-052)
Fits #25 & #35 NOT AVAILABLE AT THIS TIME.
Small Cog for Stuffers.(Item # 700-064)
Large Cog for Stuffers(Item # 700-065) Has 24 teeth.
Low gear for Enterprise and Chop-Rite Sausage Stuffers(Item # 699-807)
This sprocket drive is shown above mounted on a Chop-Rite Stuffer. Provides 2.5 : 1 power ratio for additional leverage when using the smaller stuffing tubes.
8qt Rack Screw
(Item #700-063)
This will fit an 8qt choprite stuffer and possibly an 8qt enterprise. Approx 16 5/8" long. About 1" around.
Aluminum Stuffing Tube 3/4 in.diameter fits above sausage stuffers and others that accept 1.5"
(Item # 699-922) -5.5" Long
For standard link and large sausages
Will not fit stuffer nut #699919
Latest version does not fit new stuffer nuts (699-919) for Chop-rite & Enterprise.
Use 700-137 or 700-140 instead!
Aluminum Stuffing Tube 3/4 in.diameter fits above sausage stuffers
(Item # 699-324)
For standard link and large sausages
Fits new sausage stuffer nuts #699919.
Aluminum Stuffing Tube
(Item # 699-921)
1/2 in. diameter - also fits above stuffers and others that accept 1.5" base
For smaller links - weiners - snack sausages
good for 23mm casings
Aluminum Stuffing Tube
(Item # 699-920)
3/8 in. diameter - also fits above stuffers and others that accept 1.5" base
For small beef sticks and snack links
needed for 18mm casings
Aluminum Stuffing tube 7/16 in. diameter- untapered- 5" long
(Item # 700-135)
Also fits above stuffers and others that accept 1.5" base-5 3/8"
For standard link and large sausages
For small beef sticks and snack links
needed for 18mm casings
Will accept collagen casings
Aluminum Stuffing tube 3/4 in. diameter - 5" long
(Item # 700-137)
Also fits above stuffers and others that accept 1.5" base
Stainless Steel Stuffing Tube 3/4 in. diameter
(Item # 606-000)
For 26mm and larger and for Hog Casings 7" long
