While we are glad to offer replacement parts for Hydraulic Sausage Stuffers, we do not warranty the electrical parts.
Sausage Stuffer Switch On - Off
(Item #699-003)6 screws
Fits new Sausage stuffer w/ portion control and some older models too
Maybe some others that only need on-off?
1-2 Switch
(Item #699-431)For Hydraulic Sausage Stuffer Model:2014, has 12 screws.
Should fit hydraulic stuffers made after 2013
Blue part measures 1.5" x 1.8" & face plate measures 2.5" x 2.5"
25 Amp
Be sure to compare it to your present switch.
1-2 Switch
(Item #699-430)For Hydraulic Sausage Stuffer Model starting in 2014, has 12 screws.
Blue part of switch measures 2" x 2.3" & Face plate measures 2.5" x 2.5"
32 Amp
Be sure to compare it to your present switch.
Hydraulic Switch 1-2 Heavy Duty
(Item #699-428)Heavy Duty switch for New ProProcessor 50lb. & 70lb. stuffer with reverse.
Only switch that still has twenty screws on it. Mainly to mount on older machines.
blue part measures 2.1" x 2.3" & face plate measures 2.5" x 2.5"
32 Amp - 20 screws
No longer Available
Out of stock
You can substitute 699428 for higher amperage
but you will have to enlarge
the opening where the former
switch was located
Electric Switch 1-2
(Item #699-467)
Has three settings, up, down, and off. Fits all of our hydraulic stuffers up to 2014.
Has 20 screw connections.
Blue part of switch measures 1.7" x 1.44" & face plate measures 1.9" x 1.9"
20 Amp
Be sure to compare.
Hydraulic Switch Up/Dwn 20AM
(Item #699-005)
Hydraulic Switch Timer 15AM
(Item #699-006)
Hydraulic Sausage Stuffer Tube Nut
(Item #699-451)
This is a stuffer nut for our hydraulic sausage stuffers.
Fits all ProProcessor Hydraulic Sausage Stuffers
Will also fit the Chinese SF150, SF260 & SF350 Stuffers.
Fits on threads w/ 2.75" O.D.
Pro Processor Lid Nut for Hydraulic Stuffer
(Item #600-919)
Will fit Pro Processor 30lb., 50lb., and 70lb..
Will also fit Hydraulic Sausage Stuffer SF150, SF260, SF350.
Hydraulic Stuffer Piston Bolts
(Item #699-462)
Package of eight bolts will fit 30-50-70lb stuffer piston.
Adjustable Valve Speed Control
(Item #699-466)
Fits 30 - 50 - 70 lb hydraulic stuffers.
Adjustable Pressure Control
(Item #699-468)
Fits 30 - 50 - 70 lb hydraulic stuffers.
Hydraulic Stuffer Switch
(Item #699-477)
Reverse Timer for Hydraulic Stuffer
(Item #699-442)
Reverse Adjustable Timer to be used with (#699-440 above) Reverse Timer for 30lb., 50lb., and 70lb new model stuffer. (2013+)
Fits both 110 and 220 volt machines
Hydraulic Socket Reverse Timer
(Item #699-440)
Socket for Reverse Adjustable Timer for 30lb., 50lb., and 70lb new model stuffer. (2013+)
Simple instructions
Sausage Stuffer Reverse Kit
(Item #699-444)
Reverse Adjustable Timer Kit for 30lb., 50lb., and 70lb stuffers.
this timer will stop meat continuing to run out of the nozzle on your SF150, SF260 & SF350 Hydraulic Sausage Stuffers? This kit will solve that problem. The timer will reverse the piston so that the meat will no longer come out after you release the knee switch. Your stuffer will now work similar to the ProProcessor Hydraulic stuffers that already have that feature!
Hydraulic Stuffer Relay Switch
(Item #699-471)
Fits 30 - 50 - 70 lb hydraulic stuffers.
Socket Relay for Hydraulic Stuffer
(Item #699-441)
Hydraulic Stuffer Relay Switch (HD) & Socket
(Item #699-426)
Fits 30 - 50 - 70 lb hydraulic stuffers. Fits Jan 2014 and later. Notice difference in prongs.
Wiring is different when replacing old type with new!
Hydraulic Stuffer 20 AMP Breaker
(Item #602-030)
20 AMP Breaker for 30lb. Hydraulic Stuffers
with a 550 watt motor.
Hydraulic Stuffer Pump
(Item #699-486)
Universal pump fits 30-50-70lb. hydraulic stuffers.
Hydraulic Directional Valve Control
(Item #699-449)
Includes both solenoids
Fits all of our hydraulic stuffers.
30-50-70lb. Hydraulic Stuffer Oil Manifold
(Item #699-494)
Oil Manifold fits 30-50-70lb. Hydraulic Stuffers.
Hydraulic Stuffer Motor to pump adapter
(Item #699-475)
Hydraulic Stuffer Knee Switch
(Item #699-472)
This foot switch fits all of our Hydraulic Stuffers for easy and comfortable opperation. On the newer switches, the brown and blue are the switching wires and the black is for the case ground.
Hydraulic Stuffer Caster Fixed
(Item #699-482)
4"H x 3"W. Wheel 2"H.
Hydraulic Stuffer Caster Swivel
(Item #699-481)
4"H x 6"W. Wheel 2.5"H.
Hydraulic Stuffer Hose 16"
(Item #699-485)
Hydraulic Stuffer Hose 21"
(Item #699-488)
Hydraulic Stuffer Hose 33 in.
(Item #699-487)
Hydraulic Stuffer Pressure Gage
(Item #699-489)
Manufacturer recommends 80Kg/cm2 for max pressure on Proprocesssor and SF-150, 260, 350 Hydraulic Sausage Stuffers
You probably will not want to run at that pressure because it may cause the motor to run hot. Use your judgement
Hydraulic Stuffer Transformer 24V
(Item #600-917)
Hydraulic Stuffer Filter
(Item #699-491)
Parts For 30 lb Hydraulic Sausage Stuffer
110v Hydraulic Stuffer Motor
(Item #699-483)
Fits 30lb Hydraulic Stuffer.
30lb. Hydraulic Stuffer Capacitor
(Item #699-478)
150 v. ac 400 mfd
Hydraulic Stuffer 20 AMP Breaker
(Item #602-030)
20 AMP Breaker for 30lb. Hydraulic Stuffers
with a 550 watt motor.
Hydraulic Stuffer 30lb Piston O-ring (1)
(Item #699-458)
Fits 30lb Hydraulic Sausage Stuffer #600-555
Each machine requires 3 o-rings - 2 on the piston and one in the lid.
Will also fit the 30lb. SF15.
Hydraulic Sausage Stuffer 30lb Lid Ring (1)
(Item #699-453)
Seals the top and bottom of the Stainless Steel Cylinder on the 30lb Hydraulic Sausage Stuffer #600-555
Aluminum Lid for 30lb Hydraulic Stuffer
(Item #600-926)
Hydraulic Stuffer 30lb. Stainless Steel Lid
(Item #600-903)
30lb.Hydraulic Stuffer Canister Stainless Steel
(Item #600-920)
Fits ProProcessor 30 lb. and SF150 Sausage Stuffers
Approx. 7.75" i.d.
Hydraulic Stuffer 30lb.Piston
(Item #699-460)
Fits ProProcessor 30 lb. and SF150 Sausage Stuffers
Approx. 7.75" i.d.
Hydraulic Stuffer 30lb. Piston Metal Base
(Item #699-492)
Metal Base for attaching plastic piston.
Screws into top of hydraulic cylinder rod
Hydraulic Cylinder for 30lb Stuffer
(Item #699-496)
Parts For 50 lb Hydraulic Sausage Stuffer
110v Hydraulic Stuffer Motor 1 HP
(Item #699-470)
Fits 50lb SF260 Hydraulic Stuffer from others and older ProProcessor 50 lb.stuffers.
Hydraulic Stuffer 50lb Piston O-ring (1)
(Item #699-450)
Fits Hydraulic Sausage Stuffer #699-679
Will also fit the 50lb. SF260.
(piston requires 2 - lid requires 1)
Hydraulic Sausage Stuffer 50lb Lid Ring (1)
(Item #699-452)
Seals the top and bottom of the Stainless Steel Cylinder on the 50lb Hydraulic Sausage Stuffer #699-679
Hydraulic Stuffer 50lb Cylinder Seal (1)
(Item #699-645)
Cylinder Seal for 50lbs Hydraulic Sausage Stuffer
machine requires
50 & 70lb. Hydraulic Stuffer Capacitor
(Item #699-480)
150 V. ac 500 Mfd
Hydraulic Stuffer 50lb. Stainless Steel Lid
(Item #600-904)
50lb. Hydraulic Stuffer Aluminum Lid
(Item #600-927)
Hydraulic Stuffer Canister SS 50lb.
(Item #600-921)
Fits ProProcessor 50 lb. and SF260 Sausage Stuffers
Approx. 10.25" i.d.
Hydraulic Stuffer 50lb. Piston
(Item #699-459)
Fits ProProcessor 50 lb. and SF260 Sausage Stuffers
Approx. 10.25" i.d.
Hydraulic Stuffer 50lb. Piston Metal Base
(Item #699-476)
Metal Base for attaching plastic piston.
Screws into top of hydraulic cylinder rod
Fits older hydraulic cylinder pre 2022. Threaded pin measures 7/8" O.D.
Hydraulic Cylinder for 50lb or 70lb Stuffer
(Item #699-495)
Hydraulic 50 - 70 lb. Sausage Stuffer Threaded Rod
(Item #600-961)
Parts For 70 lb Hydraulic Sausage Stuffer
50 & 70lb. Hydraulic Stuffer Capacitor
(Item #699-480)
150 V. ac 500 Mfd
Hydraulic Stuffer Motor 1 1/2 hp 110V
(Item #699-484)
Fits 70lb Hydraulic Stuffer and newer ProProcessor 50 lb. stuffers.
Hydraulic Stuffer Motor 220V 2 HP
(Item #618-430)
Fits 70 lb hydraulic stuffer.
Has .94" shaft
1,500 watt
220 volt machines.
Hydraulic Stuffer Motor 110 v. 2 hp
(Item #618-434)
Has .94" shaft
1,500 watt
110 volt machines.
Stuffer Motor Terminal Box For Hydralic Stuffer
(Item #600-988)
Hydraulic Sausage Stuffer 70lb Lid Ring
(Item #699-454)
Seals the top and bottom of the Stainless Steel Cylinder on the 70lb Hydraulic Sausage Stuffer #600-556
Hydraulic Stuffer 70lb Piston O-ring
(Item #699-455)
Fits Hydraulic Sausage Stuffer #600-556
Will also fit the 70lb. SF350.
70lb Hydraulic Stuffer Aluminum Lid
(Item #600-928)
Hydraulic Stuffer 70lb. Stainless Steel Lid
(Item #600-905)
70lb. Hydraulic Stuffer Canister SS
(Item #600-922)
Fits ProProcessor 70 lb. and SF350 Sausage Stuffers
Approx. 12.5" o.d.
Hydraulic Stuffer 70lb. Piston
(Item #699-461)
Fits ProProcessor 70 lb. and SF350 Sausage Stuffers
Approx. 12.5" i.d.
Hydraulic Stuffer 70lb. Piston Metal Base
(Item #699-493)
Metal Base for attaching plastic piston.
Screws into top of hydraulic cylinder rod
Hydraulic Cylinder for 50lb or 70lb Stuffer
(Item #699-495)
