Are you in an area where the electric service charges way overload the advantage of using 3 phase service? We can help with these 3 phase converters. We don't stock the static phase converters since they are not flexable at all and can only be used for the product that it was purchased for.
Rotary 3 phase converters (once they are started up) can be used just like any 3 phase service that comes from the service companies. You can even run several 3 phase motors on the circuit as long as they don't overload the amperage.
To select the converter that's best for you, scan to the bottom of the page.
2 hp Rotary Phase Converter
(Item #613-300)
A rotary Phase Converter is the best, safest way to convert 220 V.A.C. 1 ph. to 220 V.A.C. 3 phase.
|
3 hp Rotary Phase Converter
(Item #613-301)
A rotary Phase Converter is the best, safest way to convert 220 V.A.C. 1 ph. to 220 V.A.C. 3 phase.
 |
5 hp Rotary Phase Converter
(Item #613-302)
A rotary Phase Converter is the best, safest way to convert 220 V.A.C. 1 ph. to 220 V.A.C. 3 phase.
|
7.5 hp Rotary Phase Converter
(Item #613-303)
A rotary Phase Converter is the best, safest way to convert 220 V.A.C. 1 ph. to 220 V.A.C. 3 phase.
|
10 hp Rotary Phase Converter
(Item #613-304)
A rotary Phase Converter is the best, safest way to convert 220 V.A.C. 1 ph. to 220 V.A.C. 3 phase.
|
15 hp Rotary Phase Converter
(Item #613-305)
A rotary Phase Converter is the best, safest way to convert 220 V.A.C. 1 ph. to 220 V.A.C. 3 phase.
- Easy - no flywheel, clutch, little resistance/inertia, 1-2 times full load current upon start-up
- Medium- machine inertia, medium resistance, 3-4 times full load current upon start-up
- Hard - flywheel, no clutch, starts against load, 5-6 times, or locked rotor current upon start-up
- Very Hard- elevator, hydraulic pump, equipment under continuous load etc
- Frequent Start- instant reversing, heavy running loads
- CNC - turning centers, PLC's, EDM, CNC machining
Resistive - heaters, transformers, welders, power supplies etc
| 
