Back To Meat Grinders
|
| Knife for #22 Meat Grinder (Item # 699-997) U.S. or German manufacturer.
|
|
| ***Stainless Steel Grinder Knife for 20-22 (Item # 700-084)
|
|
| Grinder Plate for #22 Grinders w/3mm
(1/8") holes (Item # 699-809) U. S. or German made. Center hole of plate measures 11.49mm or 0.452in. Plate is 9.28mm or 0.365in thick.
|
| Grinder Plate #22 3mm 1/8" (Item #699-785) Center hole of plate measures 11mm or 0.433in. Plate is 9.04mm or 0.355in thick.
|
|
| Grinder Plate for #22 Grinders w/4.5
mm (3/16") holes (Item # 699-966) Center hole of plate measures 12.53mm or 0.493in. Plate is 8mm or 0.315in thick.
|
| Grinder Plate #22 4mm 3/16" SS (Item #699-624) Center hole of plate measures 11.35mm or 0.447in. Plate is 7.51mm or 0.295in thick.
|
| Grinder Plate #22 4mm 3/16" (Item #700-056) Center hole of plate measures 11.45mm or 0.450in. Plate is 9.38mm or 0.369in thick.
|
|
| Grinder Plate #22 4mm 3/16" SS (Item #699-624) Center hole of plate measures 11.35mm or 0.447in. Plate is 7.51mm or 0.295in thick.
|
|
| Grinder Plate #22 4mm 3/16" (Item #700-056) Center hole of plate measures 11.45mm or 0.450in. Plate is 9.38mm or 0.369in thick.
|
|
| ***Stainless Steel Grinder Plate for #22 Grinders w/ 6mm (1/4") holes (Item # 700-088) Center hole of plate measures 10.96mm or 0.431in. Plate is 9.19mm or 0.361in thick.
|
| Grinder Plate #22 6mm 1/4" (Item #699-801) Center hole of plate measures 11mm or 0.433in. Plate is 9.10mm or 0.358in thick.
|
 | Hardened Carbon Steel Grinder Plate 6mm 1/4" for 22 Grinder (Item #699-798) Center hole of plate measures 10.79mm or 0.424in. Plate is 9.19mm or 0.361in thick.
|
 | Stainless Steel Grinder Plate 8mm or 5/16" for 22 Grinder (Item #699-640) Center hole of plate measures 10.80mm or 0.421in. Plate is 9.975mm or 0.382in thick.
|
 | Hardened Carbon Steel Grinder Plate 10mm or 3/8" 22 Grinder (Item #699-803) U.S. or German made. This size plate is used for a chili cut. Center hole of plate measures 11.30mm or 0.444in. Plate is 9.20mm or 0.362in thick.
|
 | Stainless Steel Grinder Plate 10mm or 3/8" for 22 Grinder (Item #699-876) Center hole of plate measures 10.60mm or 0.417in. Plate is 9.42mm or 0.373in thick.
|
 | Hardened Carbon Steel Grinder Plate 12mm or 1/2" for 22 Grinder (Item #699-799) U.S. or German made. Center hole of plate measures 11.40mm or 0.449in. Plate is 9.49mm or 0.374in thick.
|
|
|
Beaner Grinder Plate for #22
(Item #699-856) Center hole of plate measures 11.10mm or 0.437in. Plate is 9mm or 0.354in thick.
|
| Grinder Spacer Plate #22 (Item #699-708) Center hole of plate measures 12.12mm or 0.477in. Plate is 8.46mm or 0.333in thick.
|
 | Stud for #22 Universal Brand Meat Grinder (Item #699-499) fits NC 1/2-13 thread
|
 | Stud for #22 Choprite Meat Grinder (Item #699-523) fits NC 1/2-13 thread
|
 |
Grinder Extension for #22 grinders (Item #699-784) Important safety feature for motorized grinders. If you intend to motorize your grinder, you should put this extension onto your grinder. The picture shows the extension mounted on a #22 grinder. It also shows the pan mounted above the extension which can be purchased separately below.
|
 |
Pan for above grinder extension (Item # 699-783) Really makes life easier with motorized grinders. Holds extra meat in preparation for grinding. Pan will fit both extensions ( the #22 and #32)
|
|
|
Stuffing tube set for #22 Grinder (Item # 699-815) Has auger guide that offers little resistance to meat being processed. Choice of 3 sizes of stuffing tubes. Plastic
|
Grinder Bushing 1 inch i.d. x 1 5/8
inch o.d.
(Item # 699-866)
Fits #22 and #32 with 1 inch shaft. Provides thrust and a bearing surface so that the knife
and plate can be forced together
| Price: | US$1.89 |
|---|
|
| Bearing & 2 races for Universal #22 w/pulley (Item #699-879) Race has id. of 25mm and od of 47mm. Used to thrust auger toward knife & plate to tighten them.
|
|
| Grinder Tube 22 2" (Item # 699-885)
|
Grinder Bushing 7/8 inch i.d. X 1
1/2 inch o.d.
(Item # 699-948)
Fits many #22 machines -those with 7/8 inch shaft. Provides thrust and a bearing surface
so that the knife and plate can be forced together
| Price: | US$1.89 |
|---|
|
| Cast Aluminum Pulley for #22 Grinders (Item # 699-951) Designed for Chop-rite Brand but can be made to fit other grinders. * Potentially dangerous when added to Meat grinders. Can cause amputation possibly death! Use only with meat pusher.
|
|
| Stuffing Tube for #22 Grinder 10mm. (Item #699-956) For stuffing sausage.
|
|
|
3/4 in. Stuffing Tube for #22 Grinder (Item # 699-984) For stuffing standard sized sausage with #22 grinder
|
|
1/2 in. Stuffing Tube for #22
Grinder
|
| Home
| Meat Processing
| Vegetable Processing
| Dough Processing
| Mixers
| Packaging
| Cooking
| Serving
| Catering
| Bowl Cutters
| Concessions
| Your Order
| About Us
| Site Map
