Parts For Hydraulic Sausage Stuffers
 | 3 Piece Stainless Steel Sausage Stuffer Tube Set (Item #699-926) 3 piece stainless steel tube set for hydraulic sausage stuffer #699-679 , 600-555 , 600-556. Sizes 1 1/4" - 3/4" - 1/2". Has 2 9/16" flange and are 8 1/2" total length! Very stoutly made!
|
 | Hydraulic Sausage Stuffer Nut (Item #699-451) This is a stuffer nut for our hydraulic sausage stuffers. Fits all ProProcessor Hydraulic Sausage Stuffers
|
| Adjustable Valve Speed Control (Item #699-466) Fits 30 - 50 - 70 lb hydraulic stuffers.
|
| Electric Switch (Item #699-467) Has three settings, up, down, and off. Fits all of our hydraulic stuffers.
|
| Adjustable Pressure Control (Item #699-468) Fits 30 - 50 - 70 lb hydraulic stuffers.
|
| Magnetic Valve-Pressure Control (Item #699-469) Fits 30 - 50 - 70 lb hydraulic stuffers.
|
| Hydraulic Stuffer Relay Switch (Item #699-471) Fits 30 - 50 - 70 lb hydraulic stuffers.
|
| Hydraulic Stuffer Pump (Item #699-474) Fits 50lb Hydraulic Stuffer only.
|
| Hydraulic Stuffer Motor to pump adapter (Item #699-475) .
|
 | Hydraulic Stuffer Caster Fixed (Item #699-482) 4"H x 3"W. Wheel 2"H.
|
 | Hydraulic Stuffer Caster Fixed (Item #699-481) 4"H x 6"W. Wheel 2.5"H.
|
 | Hydraulic Stuffer Hose 21 in. (Item #699-488)
|
 | Hydraulic Stuffer Hose 33 in. (Item #699-487)
|
 | Hydraulic Stuffer Pressure Gage (Item #699-489)
|
 | Hydraulic Stuffer Transformer 24V (Item #600-917)
|
 | Hydraulic Stuffer Filter (Item #699-491)
|
Parts For 30 lb Hydraulic Sausage Stuffer
| 110v Hydraulic Stuffer Motor (Item #699-483) Fits 30lb Hydraulic Stuffer.
|
 | Hydraulic Stuffer 30lb Piston O-ring (1) (Item #699-458) Fits 30lb Hydraulic Sausage Stuffer #600-555 Each machine requires 3 o-rings - 2 on the piston and one in the lid.
|
 | Hydraulic Sausage Stuffer 30lb Lid Ring (Item #699-453) Seals the top and bottom of the Stainless Steel Cylinder on the 30lb Hydraulic Sausage Stuffer #600-555
|
 | Hydraulic Stuffer 30lb. Stainless Steel Lid (Item #600-903)
|
 | Hydraulic Stuffer 30lb.Piston (Item #699-460)
|
Parts For 50 lb Hydraulic Sausage Stuffer
|
| 110v Hydraulic Stuffer Motor (Item #699-470) Fits 50lb Hydraulic Stuffer.
|
|
| Hydraulic Stuffer 50lb Piston O-ring (Item #699-450) Fits Hydraulic Sausage Stuffer #699-679 (requires 2)
|
|
| Hydraulic Sausage Stuffer 50lb Lid Ring (Item #699-452) Seals the top and bottom of the Stainless Steel Cylinder on the 50lb Hydraulic Sausage Stuffer #699-679
|
|
| Hydraulic Stuffer 50lb. Stainless Steel Lid (Item #600-904)
|
|
| Hydraulic Stuffer 50lb. Piston (Item #699-459)
|
Parts For 70 lb Hydraulic Sausage Stuffer
|
| 110v Hydraulic Stuffer Motor (Item #699-484) Fits 70lb Hydraulic Stuffer.
|
|
| Hydraulic Sausage Stuffer 70lb Lid Ring (Item #699-454) Seals the top and bottom of the Stainless Steel Cylinder on the 70lb Hydraulic Sausage Stuffer #600-556
|
|
| Hydraulic Stuffer 70lb Piston O-ring (Item #699-455) Fits Hydraulic Sausage Stuffer #600-556
|
|
| Hydraulic Stuffer 70lb. Stainless Steel Lid (Item #600-905)
|
|
| Hydraulic Stuffer 70lb. Piston (Item #699-461)
|
Parts For Weston Sausage Stuffers
 | Sausage MotorStuffer (Item #699-577) Use with Weston 11, 20 & 30 lb vertical stuffers as well as Last years' Cabelas vertical stuffers Cabelas has retooled their stuffer and these motors will not fit the new models BACK IN STOCK
|
 | Slow gear - bottom drive on 20-30 lb. stuffers (Item #660-108) Splined shaft for low speed drive for stuffing. Has keyway in center for round 44 tooth gear
|
 | Fast gear - top drive for 20-30 lb. stuffers (Item #660-109) Splined shaft for high speed drive for returning piston to top. HAS NO KEYWAY
|
 | Round gear - 44 tooth for 20-30 lb stuffers (Item #660-107) Round gear with keyway in center hole. 2 are used on 20 & 30 lb stuffers.
|
 | Drive gear - 10 tooth gear (Item #660-105) Has 10 large teeth and a keyway for round 44 tooth gear. This gear drives vertical shaft up & down.
|
 | Key for round gears (Item #660-106) Fits 20-30 lb stuffers
|
 | Vertical Geared Shaft (Item #660-110) Fits 30 lb stuffers. Has missing teeth at top and bottom to reduce damage.
|
 | Vertical Geared Shaft (Item #660-120) Fits 20 lb Stuffers.
|
 | Extra 11 lb. canister for 11 lb. stuffer (Item #660-118) Speeds stuffing time when a full canister can replace the empty one.
|
 | Stuffer Piston For Weston (Item #660-122) This is a stuffer piston for an 11 lb Weston Sausage Stuffer.
|
 | Stuffer O-ring For Weston (Item #660-123) This is a stuffer O-ring for an 11 lb Weston Sausage Stuffer.
|
|
| Extra 30 lb. canister for 30 lb. stuffer (Item #660-116) Speeds stuffing time when a full canister can replace the empty one.
|
|
| Extra 20 lb. canister for 20 lb. stuffer (Item #660-117) Speeds stuffing time when a full canister can replace the empty one.
|
|
| Stuffer Piston (Item #660-111) Fits 20-30 lb stuffers
|
 | Piston Ring (Item #660-115) Fits 20-30 lb stuffers
|
 | Air Lock (Item #660-112) Fits 20-30 lb stuffers
|
 | Air Lock Spring (Item #660-114) Fits 20-30 lb. Weston Sausage Stuffers
|
 | Lubri-Film Plus (Item #700-150) Use this where any food handling equipment needs to be lubricated.
|
 | Weston Brand Silicone Spray (Item #699-570) Heat-Stable Silicone Release Agent for food packaging and processing equipment
|
Cast Iron Stuffer Parts. Choprite Stuffer Parts
Large Stuffing Plate for #35 Sausage Stuffer.
8 quart. 8 1/8 in. In diameter
(Item # 699-751)
As shown on right above
| Price: | US$59.99 |
|---|
 | Chop-Rite or Enterprise Sausage Stuffer Nut (Item #699-919) Fits Both #35 Eight Quart Stuffer & #25 Four Quart Stuffer. Fits most cast iron stuffers that use 2 lugs to lock on. (Also showen in picture above.)
|
| Large Plunger Plate for #25(4qt)
Stuffer. (Item # 699-750) 6 1/2 in. In Diameter (to the left in picture above)
|
| Stainless Steel Strainer Basket for #35(8qt.) Stuffer (Item # 699-761) Great for pressing lard or fruit.
|
| Perforated Strainer Base for #35 (8qt.) Stuffer (Item # 699-763) Needed with Screen From Above.
|
 | Small Plunger Plate for #35 (Item # 699-757) Great for pressing lard or fruit
|
| Stainless Steel Strainer Basket for #25 (4qt) Sausage Stuffer (Item # 699-762) Great for pressing lard or fruit
|
| Perforated Strainer Base for #25 (4qt) Sausage Stuffer (Item # 699-764) Needed with Screen From Above
|
| Small Stuffing Plate for #25 (4qt) Sausage Stuffer (Item # 699-756) Needed to Fit Strainer Screen From Above
|
 | Crank for Stuffers. Has square 1/2" hole. (Item # 700-052) Fits #25 & #35
|
 | Small Cog for Stuffers. (Item # 700-064)
|
 | Large Cog for Stuffers (Item # 700-065)
|
  | Low gear for Enterprise and Chop-Rite Sausage Stuffers (Item # 699-807) This sprocket drive is shown above mounted on a Chop-Rite Stuffer. Provides 2.5 : 1 power ratio for additional leverage when using the smaller stuffing tubes.
|
 | 8qt Rack Screw (Item #700-063) This will fit an 8qt choprite stuffer and possibly an 8qt enterprise. Approx 16 5/8" long. About 1" around.
|
 | Aluminum Stuffing Tube 3/4 in.diameter fits above sausage stuffers and others that accept 1.5"-5.5" Long (Item # 699-922) For standard link and large sausages
|
|
| Aluminum Stuffing Tube (Item # 699-921) 1/2 in. diameter - also fits above stuffers and others that accept 1.5" base For smaller links - weiners - snack sausages good for 23mm casings
|
|
| Aluminum Stuffing Tube (Item # 699-920) 3/8 in. diameter - also fits above stuffers and others that accept 1.5" base For small beef sticks and snack links needed for 18mm casings
|
 | Aluminum Stuffing tube 7/16 in. diameter- untapered- 5" long (Item # 700-135) Also fits above stuffers and others that accept 1.5" base-5 3/8" For standard link and large sausages For small beef sticks and snack links needed for 18mm casings Will accept collagen casings
|
 | Aluminum Stuffing tube 3/4 in. diameter - 5" long (Item # 700-137) Also fits above stuffers and others that accept 1.5" base
|
| Home | Meat Processing | Vegetable Processing | Dough Processing | Mixers | Packaging | Cooking | Serving | Catering | Bowl Cutters | Concessions | Your Order | About Us | Site Map
